Pandon Dene Power Station
   HOME

TheInfoList



OR:

Pandon Dene Power Station was an early
coal-fired power station A coal-fired power station or coal power plant is a thermal power station which burns coal to generate electricity. Worldwide, there are about 8,500 coal-fired power stations totaling over 2,000 gigawatts Nameplate capacity, capacity. They ...
situated on the Pandon Dene, to the east of
Newcastle upon Tyne Newcastle upon Tyne ( RP: , ), or simply Newcastle, is a city and metropolitan borough in Tyne and Wear, England. The city is located on the River Tyne's northern bank and forms the largest part of the Tyneside built-up area. Newcastle is ...
.


History

At the outset of their operations in 1889, the
Newcastle-upon-Tyne Electric Supply Company The North Eastern Electric Supply Company (commonly abbreviated to NESCo) was responsible for the supply of electricity to a large amount of North East England, prior to the nationalisation of the British electricity industry with the Electricity ...
(NESCo) were confined to operating within the eastern half of Newcastle. Their initial objective was to supply electricity for "4,500 ten candle-power lamps, of which 3,000 could be alight at one time." NESCo's first major step toward achieving this goal was the erection of their first power station, at Pandon Dene in the city's east end. The station was opened in 1890.
Charles Merz Charles Hesterman Merz (5 October 1874 – 14 or 15 October 1940) was a British electrical engineer who pioneered the use of high-voltage three-phase AC power distribution in the United Kingdom, building a system in the North East of England ...
worked at the station in 1892, prior to becoming a founder of his own electrical engineering consultancy
Merz & McLellan Merz and McLellan was a leading British electrical engineering consultancy based in Newcastle. History The firm was founded by Charles Merz and William McLellan in Newcastle upon Tyne in 1902 when McLellan joined Merz's existing firm establishe ...
.


Design and specification

Upon opening, the station generated electricity using two 75
kilowatt The watt (symbol: W) is the unit of power or radiant flux in the International System of Units (SI), equal to 1 joule per second or 1 kg⋅m2⋅s−3. It is used to quantify the rate of energy transfer. The watt is named after James Wa ...
s (kW) Mordey
alternator An alternator is an electrical generator that converts mechanical energy to electrical energy in the form of alternating current. For reasons of cost and simplicity, most alternators use a rotating magnetic field with a stationary armature.Go ...
s, each driven by a conventional Robey
steam engine A steam engine is a heat engine that performs mechanical work using steam as its working fluid. The steam engine uses the force produced by steam pressure to push a piston back and forth inside a cylinder. This pushing force can be trans ...
, meaning the alternators operated at a slow speed. This gave the station an initial generating capacity of 150 kW. The Mordey generators could not operate in parallel and so each time load was transferred from one machine to another, supply would be interrupted and customers would notice a distinct flicker in the lights. The station burned 2,700 tonnes of coal per year, all of which was delivered by horse and cart. The electricity generated was supplied almost entirely for lighting purposes, and was generated at a pressure of 2,000 
Volt The volt (symbol: V) is the unit of electric potential, electric potential difference (voltage), and electromotive force in the International System of Units (SI). It is named after the Italian physicist Alessandro Volta (1745–1827). Defi ...
s, and distributed using house-to-house
transformer A transformer is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple circuits. A varying current in any coil of the transformer produces a varying magnetic flux in the transformer' ...
s which reduced the pressure to 100 Volts. Later in the station's history, further generators were installed, the largest of which had a capacity of 500 kW.


Closure

The station closed in 1902, following the opening of
Neptune Bank Power Station Neptune Bank Power Station was a coal-fired power station situated on the River Tyne at Wallsend near Newcastle upon Tyne. Commissioned in 1901 by the Newcastle upon Tyne Electric Supply Company, the station was the first in the world to provide ...
in
Wallsend Wallsend is a town in North Tyneside, England, at the eastern end of Hadrian's Wall. It has a population of 43,842 and lies east of Newcastle upon Tyne. History Roman Wallsend In Roman times, this was the site of the fort of Segedunum. This fo ...
, and was subsequently converted into a sub-station with motor-generators. The sub-station used four 800 kW
rotary converter A rotary converter is a type of electrical machine which acts as a mechanical rectifier, inverter or frequency converter. Rotary converters were used to convert alternating current (AC) to direct current (DC), or DC to AC power, before the adven ...
s. It was one of five sub-stations which provided electricity for the North Eastern Railway's
Riverside Branch The Riverside Branch was a double-track branch line, which ran between Riverside Junction in Heaton and Percy Main West Junction in Percy Main. The line opened in May 1879, later being electrified in 1904, as part of the Tyneside Electrics ...
.


References

{{North East Power Stations Power stations in North East England Buildings and structures in Newcastle upon Tyne